Numeric

This is the GR10W digitron - a medium-sized nixie tube by the English company ETL. Like its bigger brother the GR10G, this tube has a 360 degree anode mesh with no solid backing. Also like its brother, it has unusually high voltage and current requirements.

The GR-111a is a small side-view nixie tube made by Rodan-Okaya of Japan

The GR-115 is a small nixie tube made by Rodan-Okaya.

Rodan Okaya GR-201

A medium-sized tube manufactured by Rodan-Okaya

The Rodan GR-B is an unusual nixie tube. It displays the numbers 0 through 10.

The HB-106 was the first ever branded Nixie tube, made at the Haydu Brothers factory, which was owned by Burroughs.

A medium sized Nixie tube made by Gazotron

The IN-16 is a small nixie tube made by Gazotron in the former USSR.

The Gazotron IN-18 is the largest soviet Nixie tube, with 40mm digits.

Dolam LC-513 nixie tube

The LC531 is a medium sized nixie tube made by Unitra-Dolam of Poland. It has two decimal points in addition to the numbers 0-9.

The LC-631 is a medium/large sized nixie tube made by Unitra-Dolam of Poland. It is pin-compatible with other medium/large tubes such as the ZM1042 and the Z5660M

The NL-807 is a large nixie tube made by National of America

The NL-934 is a version of the NL-7037 but with a decimal point

A smooth-topped version of the B5441/NL5441. This became very popular when a few Divergence Meters were built using this tube.

The NL7037 is the largest American nixie tube. It is the same size as the Z568M.

The NL8091 is a large top-view nixie tube made by National of the USA

The SZ-8 was made by several chinese producers. This one was made by Universe.

The XN3 numicator is a medium-sized nixie tube made by Hivac of England.

The Hivac XN12 numicator

Hivac XN-13 Numicator. This has Hivac's signature gold-colored anode grid.

A Z568M tube manufactured by WF/RFT

The ZM1000 Nixie tube made by Amperex

The ZM1000R is a red-tinted version of the ZM1000

The ZM1010, made by RTC, is a version of the ZM1000 but with a completely transparent anode cage.

The ZM1020 is a top-view Nixie tube with a red coating to increase contrast. This one was made by Telefunken. It is one of many tube types with a B13B base.

The ZM1040 was made by many manufacturers, with slight differences in internal construction between them. This one was made by Tesla.

This model was made by several manufacturers, each with slightly different internal construction. This is the un-coated version of the ZM1040.